1994 BMW 325i with Avant Garde M359 18x9.5 +22 Hyper Silver Wheels

Will the Avant Garde M359 18x9.5 +22 fit a 1994 BMW 325i?

Yes, as an aggressive fit. It bolts on (5x120) but sits far enough out that it can poke past the fender at stock height.

See all 2 BMW 325i builds on Avant Garde M359 wheels →

This preview shows how Avant Garde Wheels M359 5X120 18x9.5 +22 Hyper Silver wheels look on a 1994 BMW 325i. Use this page to compare finish, diameter, and overall styling before buying.

Avant Garde Wheels M359 5X120 18x9.5 +22 Hyper Silver Wheels for the 1994 BMW 325i

The 18×9.5 +22 M359 represents a substantial step up from the E36 325i's 15-inch factory wheel, pushing into aggressive territory for this platform. At +22 offset on a 9.5-inch width, expect a near-flush fitment on stock suspension; lowering via coilovers will tuck the wheel further and likely require minor fender rolling, especially at the rear. Slight tire stretch—moving away from the factory 205/60R15 sidewall ratio—is compatible with this setup but demands careful sizing to maintain speedometer accuracy and suspension clearance under compression.

The Avant Garde Wheels M359 5X120 18x9.5 +22 Hyper Silver is one of the most popular aftermarket wheel choices for the BMW 325i platform. When shopping for 1994 BMW 325i wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 1994 BMW 325i.

1994 BMW 325i Wheel Fitment

This 18x9.5 +22 bolts on the 1994 BMW 325i (5x120) and sits 58 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.