1996 BMW 328i with Konig 47MG Hypergram 18x8.5 +35 Matte Grey Wheels

Will the Konig 47MG Hypergram 18x8.5 +35 fit a 1996 BMW 328i?

Yes, as an aggressive fit. It bolts on (5x120) but sits far enough out that it can poke past the fender at stock height.

This preview shows how Konig 47MG Hypergram 5x120 18x8.5 +35 Matte Grey wheels look on a 1996 BMW 328i. Use this page to compare finish, diameter, and overall styling before buying.

Konig 47MG Hypergram 5x120 18x8.5 +35 Matte Grey Wheels for the 1996 BMW 328i

This 18×8.5 setup represents a significant jump from the 328i's factory 15-inch wheel, gaining nearly three inches in diameter and 2.5 inches in width—a move well within tested aftermarket range for the platform. The +35 offset will sit moderately aggressive compared to factory (+42), pulling the wheel closer to the fender; on most lowered setups, fender rolling or minor trimming becomes necessary, and slight tire stretch (as shown) is typical at this width. Pair with 225/40R18 or 235/40R18 rubber to maintain accurate speedo and preserve sidewall support under the stanced geometry.

The Konig 47MG Hypergram 5x120 18x8.5 +35 Matte Grey is one of the most popular aftermarket wheel choices for the BMW 328i platform. When shopping for 1996 BMW 328i wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 1996 BMW 328i.

1996 BMW 328i Wheel Fitment

This 18x8.5 +35 bolts on the 1996 BMW 328i (5x120) and sits 39 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.