1997 Lamborghini Diablo VT with ESR SR01 18x8.5 +30 Hyper Silver Wheels

Will the ESR SR01 18x8.5 +30 fit a 1997 Lamborghini Diablo VT?

Yes. It bolts on (5x120.65) and sits in the normal range for the 1997 Lamborghini Diablo VT, from tucked to flush.

This preview shows how ESR Wheels SR SERIES SR01 5x120.65 18x8.5 +30 Hyper Silver wheels look on a 1997 Lamborghini Diablo VT. Use this page to compare finish, diameter, and overall styling before buying.

ESR Wheels SR SERIES SR01 5x120.65 18x8.5 +30 Hyper Silver Wheels for the 1997 Lamborghini Diablo VT

At +30 offset, this ESR SR01 sits 23mm further outboard than the factory wheel's +53 offset, positioning it aggressively within the tested range for this platform and requiring careful fender management on a lowered Diablo—fender rolling and potential minor trimming are typical at this stance. Stick to 225/35R18 or 235/35R18 to avoid tire-sidewall contact; the square setup shown demands precise suspension geometry to avoid rubbing through suspension travel. The 5x120.65 bolt pattern and 70.3mm hub bore match the vehicle perfectly.

The ESR Wheels SR SERIES SR01 5x120.65 18x8.5 +30 Hyper Silver is one of the most popular aftermarket wheel choices for the Lamborghini Diablo platform. When shopping for 1997 Lamborghini Diablo VT wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 1997 Lamborghini Diablo VT.

1997 Lamborghini Diablo VT Wheel Fitment

This 18x8.5 +30 bolts on the 1997 Lamborghini Diablo VT (5x120.65) and sits 23 mm further out than the factory wheel: a flush look. Its offset is 20 mm lower than DriveRight's tested range for this size (+50 to +53), so on a lowered car it will be close to the fender. Tire sizes for this wheel on the 1997 Lamborghini Diablo VT: 225/35R18, 235/35R18.

Factory specs: DriveRight vehicle data.