2000 Honda Prelude with Work Meister S1 3P 19x9.5 +24 White Wheels

Will the Work Meister S1 3P 19x9.5 +24 fit a 2000 Honda Prelude?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

This preview shows how Work Meister S1 3P 5x114.3 19x9.5+24 R Disk White wheels look on a 2000 Honda Prelude. Use this page to compare finish, diameter, and overall styling before buying.

Work Meister S1 3P 5x114.3 19x9.5+24 R Disk White Wheels for the 2000 Honda Prelude

A 19×9.5" wheel with +24 offset represents an aggressive setup on the fifth-generation Prelude, pushing nearly 3 inches wider than factory while dropping 21mm inward—this typically demands fender rolling and may require coilover lowering to clear the strut housing without rubbing. The 5×114.3 bolt pattern and 64.1 mm hub bore are direct matches, and while 19" diameter is at the tested ceiling for this platform, the extreme tire stretch shown here trades sidewall compliance for a flush, tucked appearance; consider a 225–245 width range for more conventional stretch or accept the ride-quality trade-off this stance demands.

The Work Meister S1 3P 5x114.3 19x9.5+24 R Disk White is one of the most popular aftermarket wheel choices for the Honda Prelude platform. When shopping for 2000 Honda Prelude wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2000 Honda Prelude.

2000 Honda Prelude Wheel Fitment

This 19x9.5 +24 bolts on the 2000 Honda Prelude (5x114.3) and sits 59 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.