SHOP THOUSANDS OF WHEELS AT THREEPIECE.US →

2004 S211 e320 on BBS FS 5x112 19x10 +38 PFS Diamond Silver Wheels

Vehicle 2004 S211 e320
Wheel BBS FS 5x112 19x10 +38 PFS Diamond Silver
Bolt Pattern5x112
Size19x10
Stance Stanced
Tire Slight Stretch
Type Visual preview
FRONT 3/4 2004 S211 e320 with BBS FS 5x112 19x10 +38 PFS Diamond Silver wheels front three quarter view stanced stance

Front 3/4 view of 2004 S211 e320 on BBS FS 5x112 19x10 +38 PFS Diamond Silver FS +38 PFS Diamond Silver

REAR 3/4 2004 S211 e320 with BBS FS 5x112 19x10 +38 PFS Diamond Silver wheels rear three quarter view slight stretch tires

Rear 3/4 view of 2004 S211 e320 on BBS FS 5x112 19x10 +38 PFS Diamond Silver FS +38 PFS Diamond Silver

SHOP BBS FS 5x112 19x10 +38 PFS Diamond Silver WHEELS $6,220 for a set of 4 — Free shipping

This preview shows how BBS FS 5x112 19x10 +38 PFS Diamond Silver wheels look on a 2004 S211 e320. Use this page to compare finish, diameter, and overall styling before buying.

BBS FS 5x112 19x10 +38 PFS Diamond Silver Wheels for the 2004 S211 e320

This 19×10 setup sits at the outer edge of the S211 e320's aggressive fitment range, which typically maxes at 19×9.5; the extra half-inch of width will require fender rolling and likely some suspension work to clear without rubbing, especially on full compression. Slight tire stretch is viable here but demands precise sizing—measure sidewall before purchasing. The +38 offset keeps the wheel reasonably close to the hub given the width, though fitment on most trims may benefit from 5–10mm spacers to achieve a truly flush appearance without interference at full lock or rough road articulation.

The BBS FS 5x112 19x10 +38 PFS Diamond Silver is one of the most popular aftermarket wheel choices for the S211 e320 platform. When shopping for 2004 S211 e320 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2004 S211 e320.

2004 S211 e320 Wheel Fitment

Bolt Pattern5x112
Factory / Clean Fit18x8.5
Aggressive / Stance19x9.5

The 2004 S211 e320 uses a 5x112 bolt pattern. A clean, OEM-plus setup runs around 18x8.5; for an aggressive stance, builders go as far as 19x9.5. The BBS FS 5x112 19x10 +38 PFS Diamond Silver shown here fits this platform.

SEE ANY WHEEL ON YOUR CAR

Upload a photo of your car and preview thousands of wheels before you buy.

TRY THE WHEEL VISUALIZER

For visualization purposes only. Actual fitment depends on your vehicle's fender clearance, suspension, hub bore, and bolt pattern. Contact our team for professional fitment consultation.