Front 3/4 view of 2009 Honda S2000 on Advan RGIII 5x114.3 18x10+35 Gloss Black RGIII Gloss Black
Rear 3/4 view of 2009 Honda S2000 on Advan RGIII 5x114.3 18x10+35 Gloss Black RGIII Gloss Black
Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.
See all 5 Honda S2000 builds on Advan RGIII wheels →
This preview shows how Advan RGIII 5x114.3 18x10+35 Gloss Black wheels look on a 2009 Honda S2000. Use this page to compare finish, diameter, and overall styling before buying.
This 18×10 +35 sits squarely in the S2000's aggressive stance range, delivering a noticeably wider, more filled-out look than factory 17×9 fitment. The +35 offset will place the wheel closer to flush with the fender than stock, typically requiring fender rolling and confirming fitment on your specific trim's suspension geometry. Slight tire stretch, as shown, is common at this width; verify your chosen tire's load rating and monitor sidewall wear if running lower pressures.
The Advan RGIII 5x114.3 18x10+35 Gloss Black is one of the most popular aftermarket wheel choices for the Honda S2000 platform. When shopping for 2009 Honda S2000 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2009 Honda S2000.
This 18x10 +35 bolts on the 2009 Honda S2000 (5x114.3) and sits 58 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.
Factory specs: DriveRight vehicle data.
Upload a photo of your car, pick your year, make and model, and preview this wheel or any wheel that fits.
TRY THIS WHEEL ON YOUR CARFor visualization purposes only. Actual fitment depends on your vehicle's fender clearance, suspension, hub bore, and bolt pattern. Contact our team for professional fitment consultation.