2010 Audi A6 on Motegi MR122 4X100/4X114.3 18X9 +45 SATIN BLACK W/ MACHINED STRIPE Wheels

This preview shows how Motegi MR122 4X100/4X114.3 18X9 +45 SATIN BLACK W/ MACHINED STRIPE wheels look on a 2010 Audi A6. Use this page to compare finish, diameter, and overall styling before buying.

Motegi MR122 4X100/4X114.3 18X9 +45 SATIN BLACK W/ MACHINED STRIPE Wheels for the 2010 Audi A6

The MR122 at 18×9 with +45 offset sits 0.5″ wider than factory 18×8.5 specs, positioning it in the early-aggressive range for the A6 platform. The +45 offset on a 9″ width typically yields a flush-to-slightly-aggressive stance, and the lowered suspension shown here will emphasize that look without requiring spacers. Verify tire width compatibility—a square or near-square setup works well at this diameter, though you may need to confirm fender clearance under full compression, especially if coilover travel is aggressive.

The Motegi MR122 4X100/4X114.3 18X9 +45 SATIN BLACK W/ MACHINED STRIPE is one of the most popular aftermarket wheel choices for the Audi A6 platform. When shopping for 2010 Audi A6 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2010 Audi A6.

2010 Audi A6 Wheel Fitment

The 2010 Audi A6 uses a 4x100 bolt pattern. A clean, OEM-plus setup runs around 18x8.5; for an aggressive stance, builders go as far as 19x9.5. The Motegi MR122 4X100/4X114.3 18X9 +45 SATIN BLACK W/ MACHINED STRIPE shown here fits this platform.