2011 Mazda 3 with Enkei PF01 17x9 +48 Silver Wheels

Will the Enkei PF01 17x9 +48 fit a 2011 Mazda 3?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

See all 2 Mazda 3 builds on Enkei PF01 wheels →

This preview shows how Enkei PF01 5x114.3 17x9+48 Silver wheels look on a 2011 Mazda 3 hatch. Use this page to compare finish, diameter, and overall styling before buying.

Enkei PF01 5x114.3 17x9+48 Silver Wheels for the 2011 Mazda 3 hatch

The 17x9 +48 PF01 sits significantly smaller than factory 18x8.5 specs and well below the aggressive 19x9.5 stance range, positioning this setup in a conservative, clean-fitment territory rather than the stanced category shown. The +48 offset is moderately outboard for a 9-inch width on the BL/BL3 platform, and the slight tire stretch shown is typical for this diameter-to-width ratio when running narrower rubber. This sizing avoids fender rolling and suspension modification while maintaining the Enkei's lightweight profile as a sensible daily-driver alternative to larger aggressive builds.

The Enkei PF01 5x114.3 17x9+48 Silver is one of the most popular aftermarket wheel choices for the Mazda 3 platform. When shopping for 2011 Mazda 3 hatch wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2011 Mazda 3 hatch.

2011 Mazda 3 Wheel Fitment

This 17x9 +48 bolts on the 2011 Mazda 3 (5x114.3) and sits 37 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.