2012 Mazda MX-5 Miata with Advan RGIII 17x9 +45 Black Wheels

Will the Advan RGIII 17x9 +45 fit a 2012 Mazda MX-5 Miata?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

See all 8 Mazda MX-5 Miata builds on Advan RGIII wheels →

This preview shows how Advan RGIII 5x114.3 17x9.0+45 Gloss Black wheels look on a 2012 Mazda MX-5 Miata NC. Use this page to compare finish, diameter, and overall styling before buying.

Advan RGIII 5x114.3 17x9.0+45 Gloss Black Wheels for the 2012 Mazda MX-5 Miata NC

This 17×9.0 with +45 offset sits at the outer edge of the NC Miata's aggressive fitment range; the +45 offset will bring the wheel closer to flush against the fender than factory, typically requiring fender roll and possibly slight lowering to avoid rubbing at full suspension compression. Tire stretch is common at this width on the Miata platform—consider 215–225 width tires to maintain sidewall support while achieving the intended tucked appearance. Verify wheel-well clearance on your specific trim, as suspension geometry varies.

The Advan RGIII 5x114.3 17x9.0+45 Gloss Black is one of the most popular aftermarket wheel choices for the Mazda MX-5 Miata platform. When shopping for 2012 Mazda MX-5 Miata NC wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2012 Mazda MX-5 Miata NC.

2012 Mazda MX-5 Miata Wheel Fitment

This 17x9 +45 bolts on the 2012 Mazda MX-5 Miata (5x114.3) and sits 37 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.