2012 Mazda MX-5 Miata NC on Kansei K12B KNP 5x114.3 17x9 22 Bronze Wheels

This preview shows how Kansei K12B KNP 5x114.3 17x9 22 Bronze wheels look on a 2012 Mazda MX-5 Miata NC. Use this page to compare finish, diameter, and overall styling before buying.

Kansei K12B KNP 5x114.3 17x9 22 Bronze Wheels for the 2012 Mazda MX-5 Miata NC

The 17×9 K12B lands directly in the NC Miata's aggressive stance range, matching the upper limit of documented fitment for lowered platforms; factory setups run 17×7.5, so this +1.5-inch width pushes into genuinely tucked territory. Offset data is unavailable, so flush fitment cannot be confirmed—verify against the vehicle's hub before purchase. The slight tire stretch shown is typical at this width; pairing with a 205 or 215 section (down from stock 225) will minimize sidewall load and is common on 9-inch wheels for this platform.

The Kansei K12B KNP 5x114.3 17x9 22 Bronze is one of the most popular aftermarket wheel choices for the Mazda MX-5 Miata NC platform. When shopping for 2012 Mazda MX-5 Miata NC wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2012 Mazda MX-5 Miata NC.

2012 Mazda MX-5 Miata NC Wheel Fitment

The 2012 Mazda MX-5 Miata NC uses a 5x114.3 bolt pattern. A clean, OEM-plus setup runs around 17x7.5; for an aggressive stance, builders go as far as 17x9. The Kansei K12B KNP 5x114.3 17x9 22 Bronze shown here fits this platform.