2016 Audi S3 with Ravetti M13 20x10 +40 SATIN BLACK MACHINED Wheels

Will the Ravetti M13 20x10 +40 fit a 2016 Audi S3?

Yes, as an aggressive fit. It bolts on (5x112) but sits far enough out that it can poke past the fender at stock height.

This preview shows how RAVETTI M13 5X112 20x10 +40 SATIN BLACK MACHINED wheels look on a 2016 Audi S3. Use this page to compare finish, diameter, and overall styling before buying.

RAVETTI M13 5X112 20x10 +40 SATIN BLACK MACHINED Wheels for the 2016 Audi S3

The 20×10 +40 represents a significant step outward from the S3's factory 18×7.5 +51, moving the wheel face roughly 11 mm closer to the fender—a setup that demands lowering and typically requires fender rolling to clear at full suspension compression. The 5×112 bolt pattern matches factory spec with proper hub bore compatibility. Extreme tire stretch (shown here) is achievable but stresses sidewall integrity; a 235/35R20 or 245/35R20 would better balance fitment safety with the aggressive stance this offset delivers.

The RAVETTI M13 5X112 20x10 +40 SATIN BLACK MACHINED is one of the most popular aftermarket wheel choices for the Audi S3 platform. When shopping for 2016 Audi S3 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2016 Audi S3.

2016 Audi S3 Wheel Fitment

This 20x10 +40 bolts on the 2016 Audi S3 (5x112) and sits 43 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.