2017 Audi RS3 with Work Meister S1 3P 19x11 +29 White Wheels

Will the Work Meister S1 3P 19x11 +29 fit a 2017 Audi RS3?

Yes, as an aggressive fit. It bolts on (5x112) but sits far enough out that it can poke past the fender at stock height.

This preview shows how Work Meister S1 3P 5x112 19x11+29 O Disk White wheels look on a 2017 Audi RS3. Use this page to compare finish, diameter, and overall styling before buying.

Work Meister S1 3P 5x112 19x11+29 O Disk White Wheels for the 2017 Audi RS3

The 19×11 +29 offset represents a significant widening over the factory 19×8 +49 wheel, moving the contact patch outward by approximately 20mm per side for a noticeably aggressive stance. This setup demands fender rolling and typically requires lowering (coilovers strongly recommended) to clear the factory bodywork; the extreme tire stretch shown sacrifices sidewall support and should be matched only to smooth road surfaces. Sizing down the tire from 255/30R19 factory spec will further reduce load capacity—verify speedometer calibration and consult your tire manufacturer for the chosen stretch ratio before committing.

The Work Meister S1 3P 5x112 19x11+29 O Disk White is one of the most popular aftermarket wheel choices for the Audi RS3 platform. When shopping for 2017 Audi RS3 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2017 Audi RS3.

2017 Audi RS3 Wheel Fitment

This 19x11 +29 bolts on the 2017 Audi RS3 (5x112) and sits 58 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.