2017 Audi S3 with Advan Racing R6 20x10 +25 RACING CANDY RED Wheels

Will the Advan Racing R6 20x10 +25 fit a 2017 Audi S3?

Yes, as an aggressive fit. It bolts on (5x112) but sits far enough out that it can poke past the fender at stock height.

This preview shows how Advan Racing R6 5x112 20x10.0 +25 RACING CANDY RED wheels look on a 2017 Audi S3. Use this page to compare finish, diameter, and overall styling before buying.

Advan Racing R6 5x112 20x10.0 +25 RACING CANDY RED Wheels for the 2017 Audi S3

This 20×10.0 +25 setup represents an aggressive departure from the S3's factory 18-inch wheel, pushing toward the upper limit of tested fitment for the platform. The +25 offset on a 10-inch width will require fender rolling and likely suspension work (lowering springs or coilovers) to avoid rubbing; combined with the extreme tire stretch shown, this configuration prioritizes stance over tire sidewall support and everyday practicality. Verify hub-centric rings for the 57.1 mm bore and confirm suspension geometry clearance before purchase.

The Advan Racing R6 5x112 20x10.0 +25 RACING CANDY RED is one of the most popular aftermarket wheel choices for the Audi S3 platform. When shopping for 2017 Audi S3 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2017 Audi S3.

2017 Audi S3 Wheel Fitment

This 20x10 +25 bolts on the 2017 Audi S3 (5x112) and sits 58 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.