2017 Skoda octavia on Volk Racing TE37 Saga S-Plus 5x112 18x8.5+42 Bronze Wheels

This preview shows how Volk Racing TE37 Saga S-Plus 5x112 18x8.5+42 Bronze wheels look on a 2017 Skoda octavia. Use this page to compare finish, diameter, and overall styling before buying.

Volk Racing TE37 Saga S-Plus 5x112 18x8.5+42 Bronze Wheels for the 2017 Skoda octavia

The 18×8.5 +42 TE37 Saga S-Plus sits squarely in the Octavia's factory fitment range, making it a direct OEM-comparable choice with no fender modification needed on stock or mildly lowered suspension. The +42 offset is neutral for this diameter—neither aggressive nor conservative—and will sit close to flush depending on your specific trim's wheel arch and suspension geometry. Pairing with square sizing (matching front and rear widths) keeps the stance balanced; if lowered further, minor fender roll may occur on full compression, and a modest spacer or slight tire downsizing can refine clearance if needed.

The Volk Racing TE37 Saga S-Plus 5x112 18x8.5+42 Bronze is one of the most popular aftermarket wheel choices for the Skoda octavia platform. When shopping for 2017 Skoda octavia wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2017 Skoda octavia.

2017 Skoda octavia Wheel Fitment

The 2017 Skoda octavia uses a 5x112 bolt pattern. A clean, OEM-plus setup runs around 18x8.5; for an aggressive stance, builders go as far as 19x9.5. The Volk Racing TE37 Saga S-Plus 5x112 18x8.5+42 Bronze shown here fits this platform.