2018 Ford Focus ST with MRR FS1 18x8.5 +35 Brushed Tint Wheels

Will the MRR FS1 18x8.5 +35 fit a 2018 Ford Focus ST?

Yes. It bolts on (5x108) and sits in the normal range for the 2018 Ford Focus ST, from tucked to flush.

See all 2 Ford Focus builds on MRR FS1 wheels →

This preview shows how MRR FS1 5x108 18x8.5 +35 Brushed Tint wheels look on a 2018 Ford Focus ST. Use this page to compare finish, diameter, and overall styling before buying.

MRR FS1 5x108 18x8.5 +35 Brushed Tint Wheels for the 2018 Ford Focus ST

The 18x8.5 MRR FS1 sits 0.5 inches wider than the Focus ST's factory 18x8.0 wheel, and a +35 offset falls within the tested safe range (40–52) for this platform—positioning it moderately aggressive and requiring fender roll on stock suspension. On a lowered setup as shown, expect a near-flush stance; stock ride height may cause light rubbing. The 235/40R18 tire matches factory sizing and pairs well with this width for a square, balanced fitment without stretch concerns.

The MRR FS1 5x108 18x8.5 +35 Brushed Tint is one of the most popular aftermarket wheel choices for the Ford Focus platform. When shopping for 2018 Ford Focus ST wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2018 Ford Focus ST.

2018 Ford Focus ST Wheel Fitment

This 18x8.5 +35 bolts on the 2018 Ford Focus ST (5x108) and sits 26 mm further out than the factory wheel: a flush look. Its offset is 5 mm lower than DriveRight's tested range for this size (+40 to +52), so on a lowered car it will be close to the fender. Tire sizes for this wheel on the 2018 Ford Focus ST: 235/40R18.

Factory specs: DriveRight vehicle data.