2024 Mazda 3 with BBS LM 19x9 +38 Diamond Silver Wheels

Will the BBS LM 19x9 +38 fit a 2024 Mazda 3?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

See all 13 Mazda 3 builds on BBS LM wheels →

This preview shows how BBS LM 5x114.3 19x9.0+38 Diamond Silver wheels look on a 2024 Mazda 3. Use this page to compare finish, diameter, and overall styling before buying.

BBS LM 5x114.3 19x9.0+38 Diamond Silver Wheels for the 2024 Mazda 3

The 19×9.0 +38 offset positions this BBS LM moderately forward on the 2024 Mazda 3's 5×114.3 hub, sitting near the middle of typical fitment ranges for the platform. This setup will present a largely flush appearance on stock suspension, though you may observe minor poke depending on trim and fender geometry. The shown tire stretch is functional but at the tighter end; consider a 225 or 235 width to balance sidewall support, or size down slightly if you prefer zero stretch.

The BBS LM 5x114.3 19x9.0+38 Diamond Silver is one of the most popular aftermarket wheel choices for the Mazda 3 platform. When shopping for 2024 Mazda 3 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2024 Mazda 3.

2024 Mazda 3 Wheel Fitment

This 19x9 +38 bolts on the 2024 Mazda 3 (5x114.3) and sits 44 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height. Its offset is 2 mm lower than DriveRight's tested range for this size (+40 to +40), so on a lowered car it will be close to the fender. Tire sizes for this wheel on the 2024 Mazda 3: 225/35R19.

Factory specs: DriveRight vehicle data.