2008 Acura RDX with MRR VP3 20x9 +20 Silver Machine Face Wheels

Will the MRR VP3 20x9 +20 fit a 2008 Acura RDX?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

See all 2 Acura RDX builds on MRR VP3 wheels →

This preview shows how MRR VP3 5x114.3 20x9 +20 Silver Machine Face wheels look on a 2008 Acura RDX. Use this page to compare finish, diameter, and overall styling before buying.

MRR VP3 5x114.3 20x9 +20 Silver Machine Face Wheels for the 2008 Acura RDX

The 20×9 MRR VP3 on a lowered 2008 RDX presents an aggressive stance typical of deep-dish sport wheels on compact SUVs. Without confirmed offset data, fitment depends on the specific +20 value in relation to your suspension geometry and fender clearance; lowering will reduce wheel-well room and typically requires either fender rolling or spacers to prevent rubbing. A meaty, stretched tire will emphasize the stance and may affect handling response, so verify your preferred tire width against the wheel's load rating before purchase.

The MRR VP3 5x114.3 20x9 +20 Silver Machine Face is one of the most popular aftermarket wheel choices for the Acura RDX platform. When shopping for 2008 Acura RDX wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2008 Acura RDX.

2008 Acura RDX Wheel Fitment

This 20x9 +20 bolts on the 2008 Acura RDX (5x114.3) and sits 44 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height. Its offset is 15 mm lower than DriveRight's tested range for this size (+35 to +45), so on a lowered car it will be close to the fender. Tire sizes for this wheel on the 2008 Acura RDX: 245/40R20.

Factory specs: DriveRight vehicle data.