2010 Mitsubishi Eclipse with Forgestar CF10 19x10 +42 Anthracite Wheels

Will the Forgestar CF10 19x10 +42 fit a 2010 Mitsubishi Eclipse?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

This preview shows how Forgestar CF10 5x114.3 19x10 +42 Gloss Anthracite wheels look on a 2010 Mitsubishi Eclipse. Use this page to compare finish, diameter, and overall styling before buying.

Forgestar CF10 5x114.3 19x10 +42 Gloss Anthracite Wheels for the 2010 Mitsubishi Eclipse

The 19×10 CF10 sits at the outer edge of aggressive fitment for the 2010 Eclipse, exceeding the stance-range maximum of 19×9.5 by half an inch in width. This setup will require fender rolling and likely suspension work (coilovers or lowering) to achieve the stanced appearance shown; without modification, expect rubbing at full lock and over bumps. A slightly stretched tire (235–245 width) is typical for this configuration and helps prevent sidewall bulge, though fitment should be verified against your specific trim's suspension geometry.

The Forgestar CF10 5x114.3 19x10 +42 Gloss Anthracite is one of the most popular aftermarket wheel choices for the Mitsubishi Eclipse platform. When shopping for 2010 Mitsubishi Eclipse wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2010 Mitsubishi Eclipse.

2010 Mitsubishi Eclipse Wheel Fitment

This 19x10 +42 bolts on the 2010 Mitsubishi Eclipse (5x114.3) and sits 36 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.