2013 Audi A6 on Kansei K12B KNP 5X120 18x9.5 22 Bronze Wheels

This preview shows how Kansei K12B KNP 5X120 18x9.5 22 Bronze wheels look on a 2013 Audi A6. Use this page to compare finish, diameter, and overall styling before buying.

Kansei K12B KNP 5X120 18x9.5 22 Bronze Wheels for the 2013 Audi A6

This 18×9.5 setup sits at the outer edge of factory fitment for the C7 A6, exceeding the stock 18×8.5 by one inch in width. On a lowered platform, the extra width will produce a flush-to-slightly-aggressive stance; expect minor fender contact on full compression unless the car runs coilovers with sufficient ride-height tuning. A square tire setup (matching widths front and rear) is achievable here, though confirm sidewall clearance to the inner fender and consider a modest spacer if the offset runs conservative for this width.

The Kansei K12B KNP 5X120 18x9.5 22 Bronze is one of the most popular aftermarket wheel choices for the Audi A6 platform. When shopping for 2013 Audi A6 wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2013 Audi A6.

2013 Audi A6 Wheel Fitment

The 2013 Audi A6 uses a 5x120 bolt pattern. A clean, OEM-plus setup runs around 18x8.5; for an aggressive stance, builders go as far as 19x9.5. The Kansei K12B KNP 5X120 18x9.5 22 Bronze shown here fits this platform.