2019 Corolla Altis on MST Wheels MT01 5x100 18x9.5 +35 Matte Black Wheels

This preview shows how MST Wheels MT01 5x100 18x9.5 +35 Matte Black wheels look on a 2019 Corolla Altis. Use this page to compare finish, diameter, and overall styling before buying.

MST Wheels MT01 5x100 18x9.5 +35 Matte Black Wheels for the 2019 Corolla Altis

The 18×9.5 MT01 at +35 offset sits in the aggressive range for the 2019 Corolla Altis, stepping up one inch in width from the factory 18×8.5 baseline. On a lowered platform, this setup typically requires fender rolling and may benefit from slight tire downsizing to prevent rubbing; a square 225–235 mm tire will fill the wheel well appropriately. Verify fitment with your specific trim's suspension geometry, as coilover ride height and geometry changes can affect clearance at full compression and rebound.

The MST Wheels MT01 5x100 18x9.5 +35 Matte Black is one of the most popular aftermarket wheel choices for the Corolla Altis platform. When shopping for 2019 Corolla Altis wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2019 Corolla Altis.

2019 Corolla Altis Wheel Fitment

The 2019 Corolla Altis uses a 5x100 bolt pattern. A clean, OEM-plus setup runs around 18x8.5; for an aggressive stance, builders go as far as 19x9.5. The MST Wheels MT01 5x100 18x9.5 +35 Matte Black shown here fits this platform.