2010 Mitsubishi Eclipse with Forgestar CF5 18x10 +42 Anthracite Wheels

Will the Forgestar CF5 18x10 +42 fit a 2010 Mitsubishi Eclipse?

Yes, as an aggressive fit. It bolts on (5x114.3) but sits far enough out that it can poke past the fender at stock height.

See all 2 Mitsubishi Eclipse builds on Forgestar CF5 wheels →

This preview shows how Forgestar CF5 5x114.3 18x10 +42 Gloss Anthracite wheels look on a 2010 Mitsubishi Eclipse. Use this page to compare finish, diameter, and overall styling before buying.

Forgestar CF5 5x114.3 18x10 +42 Gloss Anthracite Wheels for the 2010 Mitsubishi Eclipse

The 18×10 Forgestar CF5 sits outside the Eclipse's typical fitment envelope, stepping up in width from the factory 18×8 baseline and exceeding the aggressive 19×9.5 range. This setup will require suspension modification (coilovers or lowering) to achieve the stanced appearance shown, and the +42 offset paired with 10-inch width typically demands fender rolling and may need minor pull to clear the inner sidewall under compression. Slight tire stretch, as pictured, is the practical choice here to avoid sidewall bulge and maintain clearance.

The Forgestar CF5 5x114.3 18x10 +42 Gloss Anthracite is one of the most popular aftermarket wheel choices for the Mitsubishi Eclipse platform. When shopping for 2010 Mitsubishi Eclipse wheels, fitment is everything -- bolt pattern, hub bore, offset, and fender clearance all play a role in achieving the perfect stance. Our fitment specialists can help you dial in the exact specs for your 2010 Mitsubishi Eclipse.

2010 Mitsubishi Eclipse Wheel Fitment

This 18x10 +42 bolts on the 2010 Mitsubishi Eclipse (5x114.3) and sits 36 mm further out than the factory wheel: an aggressive fit that can poke past the fender at stock height.

Factory specs: DriveRight vehicle data.